Brand New Product, 15 Years
Warranty, 1-2 Days Free Shipping (Authorized Dealer)
The M Series
has become the accepted standard for affordable, reliable reference and
measurement microphones that are accurate in the time domain and frequency
response. They are remarkably stable with respect to temperature and
atmospheric conditions and are optimized for clean, very fast impulse performance
providing accurate wideband response with virtually no handling noise.
- 50kHz flat frequency response
- Ideally suited for acoustical
measurements that require extended frequency response, including high-end
loudspeaker design and quality control, scientific research, measurements
of ultrasonic or subsonic transducers, or any application where an
extremely accurate free-field measurement microphone is required
- Our top of the line measurement
microphone with extraordinary impulse response for those who have
stringent requirements and demand the very best
- Provides laboratory grade
accuracy
- Improved version of the
SMAARTMIC™ previously offered by EAW
- Omnidirectional polar pattern
- Flat frequency response, fast
impulse response and exceptional polar characteristics
- Used by SMAART™, MLSSA™,
Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems
manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and
applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is
delivered with its own calibration chart providing its individually
measured open-circuit sensitivity and the frequency response curve
- Electronic Calibration File
available
- Operating Temp Range: -20 deg C
to +60 deg C ( -4 deg. F to 140 deg. F)
- Storage Temp Range: -20 deg C to
+50 deg C ( -4 deg. F to 122 deg. F)
- Humidity: Up to 90%
- Re-calibration recommended every
five (5) years
Specification:
· Frequency Response: 3Hz to 50kHz
±1/-3dB
· Polar Pattern: Omnidirectional
· Sensitivity: 36mV/Pa (-29dBV/Pa)
· Power Requirements: 48V Phantom, 10mA
· Max Acoustic Input: 140dB SPL
· Output: XLR (pin 2+)
· Output Impedance: 65Ω balanced
(between pins 2 & 3)
· Min Output Load: 600Ω between pins 2
& 3
· Noise: 20dB SPL equivalent (A
weighted)
· Dimensions L x D: 229mm x 22mm (9 x
.860 inches)
· Weight: .5 lb. (225g)